- Tech Specs
- Query Information
Features of Gingival
It can be the ALL-in-One supporting all types of ceramic restorations specialized for dental zirconia and lithium Disilicate etc. No need other different pastes.
Good Surface Finishing
Surface finishing may involve polishing or staining and glazing, and is the last step when processing your CAD/CAM restoration before cementation. It is this process that will give your restoration a high shine appearance which is desirable for aesthetic and hygienic reasons.
Bacteria don't adhere to a smooth surface nearly as much as a rough surface, and it is also easier to clean for your patient. On top of that your restoration will have better colour stability long term as it doesn’t stain as much.
Gingival gradation more natural
The glaze paste performance is extremely matched with natural gingival.
Accessories for Gingival
Paste 3D Transparent: 3 grams
Paste 3D Ginglval 4: 3 grams
Paste 3D Ginglval White: 3 grams
Paste 3D Ginglval Modifier: 3 grams
3D Brush: 1 pc
Diluting Liquid: 10 ml
Refreshing Liquid: 10 ml
Gingival Technical Specifications
|Temperature at beginning (°C/°F)||450 / 842|
|Drying time (min)||8|
|Heat rate (°C/°F per m)||55 / 131|
|Vacuum begins (°C/°F)||450 / 842|
|Vacuum ends (°C/°F)||730/1346 for 3D, 720/1328 for 2D & 3D|
|Sintering temperature (°C/°F)||730/1346 for 3D, 720/1328 for 2D & 3D|
|Hold-time (min)||1 (without vacuum)|
|Coefficient of thermal expansion||CTE(25 °C/77 °F-Tg)|
|Flexural strength||>50 MPa|
|Chemical solubility||< 100 μg/cm20|
|Transformation temperature||≈ 480 °C - 490 °C (896 °F - 914 °F)|