All Categories

Home > Production Line > Zirconia Blocks

3D Pro Multilayer

3D Pro Multilayer

3D Pro multilayer restorations have better aesthetic performance, as their excellent translucent properties, it is becoming the first choice today in the cases with high aesthetic requirements.

Contact us
Indications:

Restorations are available with monolithic full contour crowns, bridges, veneers or full arch.

3D Pro Multilayer

  • Features
  • Accessories
  • Tech Specs
  • Query Information
Features of 3D Pro Multilayer

3D Pro multilayer has been introduced into dental practice as an alternative to metal-ceramic dental restorations. Compared to the traditional porcelain to metal restorations


  • Consistent VITA® Classic Shade Match

    Strictly follow up VITA® Classic Shade from the R & D phase and also by the standard production with shade match.

  • aaa
    Glazed with Bloomden CeramStar® Glaze/Stain Kit

    Preparation: 3D Pro 3-unit bridge after milled and sintered and then glazed.

  • aaa
    Developed an improved flexural strength

    The flexural strength of this new material is 650-1100 MPa. These conveniences have made the 3D Pro multilayer zirconia used more and more for crowns and bridges inlateral applications.

  • feature分辨率2
    Excellent aesthetics performance

    Translucency can be regulated by controlling the absorption, reflection, and transmission of light through the material. The translucency is higher when the reluctance is low and the transmission is high.

  • feature分辨率2
    Compared to previous stage the strength as a trend

    Bloomzir® 3D Pro multilayer zirconia is unlike any other zirconia, it can exhibit a strength range from 650MPa to 1100MPa which can cover posteriors and anteriors for both crowns and bridges including implant restorations.

  • feature分辨率2
    Monoclinic resistance

    Unique hydrolysis microstructure and chemical formulation by the hydrothermal treatment also resist degradation of aging which the cubic shifted to monoclinic state that can be observed in zirconia structure.

  • feature分辨率2
    High speed sintering cycle

    An excellent attributes is the fast sintering cycle which can ensure the strength, translucency and aging resistance simultaneously. The high-productivity sintering cycle allows for “inside furnace” time in 45 minutes.

  • feature分辨率2
    Low Wear Rate

    The average crystalline size of less than 0.5 μm and the Hydrolyzed powder properties are organized inside 3D Pro multilayer zirconia which enable 3D Pro multilayer zirconia to be long-term enamel wear behavior closed to the natural human teeth after several times of lab-test. 

Accessories for 3D Pro Multilayer
  • CeramStar® Glaze/Stain Gingival Set

    It contains 4 single masses as well as special liquids and accessories. The 3D pastes were specially developed for the aesthetic finalization and characterization of the gingival-colored parts of ceramic restorations, made of lithium disilicate and 3D Pro Multilayer. All parts of the set are also available individually.

    LEARN MORE
  • accessories分辨率
    CeramStar® Glaze/Stain Vivid Set

    It contains 7 single masses as well as special liquids and accessories. The 2D pastes were specially developed for the basic aesthetic finalization of the ceramic restorations, made of lithium disilicate and 3D Pro Multilayer. All parts of the set are also available individually.

    LEARN MORE
  • accessories分辨率
    CeramStar® Glaze/Stain Blossom Set

    It contains 17 single masses as well as special liquids and accessories. The 2D and 3D pastes and stains were specially developed for the professional aesthetic finalization of ceramic restorations, made of lithium disilicate and 3D Pro Multilayer. All parts of the set are also available individually.

    LEARN MORE
3D Pro Multilayer Technical Specifications
Technical Specifications
3D Pro Multilayer
ZrO2+HfO2+Y2O3≥99%
Y2O34.5%-10%
Al2O3<0.15%
Density before sintering (g.cm-3)3.15±0.05
Density after sintering (g.cm-3)6.07±0.02
CTE (25-500°C) (K-1)10.5±0.5
Flexural strength after sintering (MPa)>650
Aging surface monoclinic phase content<12%
Light transmittance<49%
Chemical solubility after sintering (µg.cm-2)<100
Cytotoxicity0 Level
Radioactivity (Bq.g-1)<0.1
Sintering temperature (°C)1500
Systems98mm / 95mm / 92*75mm
Thickness12m / 14mm / 16mm / 18mm
20mm / 22mm / 25mm
ShadesA1 A2 A3 A3.5 A4 / B1 B2 B3 B4
C1 C2 C3 C4 / D2 D3 D4 / BL1 BL2 BL3 BL4

 

Query Information